Brand: GRAYWOLF®
Brand: GRAYWOLF®
Aluminized gloves with Kevlar palm, foam-fleece lining & FR Velcro strap for extreme heat & molten metal protection.
EN 388 2016 Results: 4444E
Abrasion: 4
Cut (Coupe Test): 4
Tear: 4
Puncture: 4
Cut (TDM-100 Test): E
EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove’s ratings.
Protective Gloves Against Thermal Hazards: 422X4X
Resistance to Flammability – 4
Contact Heat Resistance – 2
Convective Heat Resistance – 2
Radiant Heat Resistance – X
Resistance to Small Splashes of Molten Metal – 4
Resistance to Large Splashes of Molten Metal – X
EN 407 is a general European standard designed to be used for any glove that is to be sold as providing protection against thermal hazards. All six tests are graded on a scale from 0 to 4, with 0 signifying that the glove failed the test, and 4 demonstrating it has achieved the maximum resistance in that specific area.
The EN ISO 21420:2020 standard outlines the general requirements and test methods for protective gloves. It covers aspects such as design, construction, comfort, efficiency, and safety, ensuring gloves meet necessary performance criteria. This standard applies to all protective gloves, including those used in industrial environments, and replaces the previous EN 420:2003 standard.
The CE mark (Conformité Européenne) indicates that a safety product meets the essential health, safety, and environmental protection requirements of the European Economic Area (EEA). It ensures that the product complies with relevant EU directives and can be sold freely within the EEA, providing assurance of its safety and quality.
Category III PPE is designed to protect users from serious or fatal hazards. These are life-threatening risks where failure of protection could result in irreversible health damage or death.
EN 388 2016 Results: 4444E
Abrasion: 4
Cut (Coupe Test): 4
Tear: 4
Puncture: 4
Cut (TDM-100 Test): E
EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove’s ratings.
Protective Gloves Against Thermal Hazards: 422X4X
Resistance to Flammability – 4
Contact Heat Resistance – 2
Convective Heat Resistance – 2
Radiant Heat Resistance – X
Resistance to Small Splashes of Molten Metal – 4
Resistance to Large Splashes of Molten Metal – X
EN 407 is a general European standard designed to be used for any glove that is to be sold as providing protection against thermal hazards. All six tests are graded on a scale from 0 to 4, with 0 signifying that the glove failed the test, and 4 demonstrating it has achieved the maximum resistance in that specific area.
The EN ISO 21420:2020 standard outlines the general requirements and test methods for protective gloves. It covers aspects such as design, construction, comfort, efficiency, and safety, ensuring gloves meet necessary performance criteria. This standard applies to all protective gloves, including those used in industrial environments, and replaces the previous EN 420:2003 standard.
The CE mark (Conformité Européenne) indicates that a safety product meets the essential health, safety, and environmental protection requirements of the European Economic Area (EEA). It ensures that the product complies with relevant EU directives and can be sold freely within the EEA, providing assurance of its safety and quality.
Category III PPE is designed to protect users from serious or fatal hazards. These are life-threatening risks where failure of protection could result in irreversible health damage or death.
Application: Molten metal handling, Furnace and kiln operations, Welding and smelting tasks, High-temperature industrial work
Trade: Metalworking, Foundry operations, Industrial safety, Heavy-duty manufacturing
Hazard: Radiant and contact heat, Molten metal splash, Abrasions and mechanical injuries, Flame and thermal exposure
Industry: Steel and aluminum production, Aerospace and automotive manufacturing, Industrial welding and fabrication, Heavy equipment and machinery sectors
+92 302 824 4147
+1 571 321 7211
Plot 416, 431 Sector 7/a Korangi Industrial Area, Karachi, Sindh 74900
All content, including text, graphics, logos, and designs, is the exclusive property of XPRO®. It is protected under patent, copyright, and trademark laws. Unauthorized use, reproduction, or distribution is strictly prohibited. All rights reserved.
